Shortening the antenna "tail"
The antenna module is supplied with a 6 inch tail. For vehicles with flat roofs (SUVs,
NOTE: For vehicles with a sloping roof, or if the module is mounted on the trunk of a convertible, the tail should not be shortened!
Figure 4: Shortening the antenna tail
After the precise length of the tail has been determined, the adhesive strip may be cut to length and applied to the antenna tail.
Figure 5: Applying adhesive tape
Removing the antenna
The antenna module may be removed, using a nylon cord (e.g. fishing line) to cut through the adhesive pad between the antenna module and the vehicle. Work from the front to the tail in a
Figure 6: Removing antenna
5
