Kenwood CX-SR10 installation manual Cable routing along the trunk rubber molding

7.If there is no suitable cable channel, the cable may be routed directly from the window molding to the right or left corner of the trunk.

Figure 15: Cable routing along the trunk rubber molding

It may be necessary to remove the plastic housings from the antenna connectors in order to feed the cables through narrow openings. Note: Remember to reconnect the correct housing to its corresponding cable.

Figure 16 Removing connector housings

Most Sirius receivers (including the Kenwood KTC-SR901) have two antenna inputs with the same color-coding as the antenna cable - white = terrestrial; blue = satel- lite. Simply plug the cable with the blue connector into the blue input and the cable with the white connector into the white input.

Figure 17: Connecting the Sirius receiver

However, some receivers use only one SMB connector, in which case the plastic housing must be permanently removed and the connector inserted directly into the receiver.

9