Preparing to Play Tracks
Preparation ÖTurn the unit ON. |
|
(For U.S.A. and Canada) | (For other countries) |
POWER |
|
ON/STANDBY | ON/STANDBY |
GRC operation : Complete the procedure in “Basic Operations for the Graphical Remote Control Unit (GRC)”
90
Loading/unloading discs
1Load/unload a disc.
1Open the tray.
0
2Place/remove a disc.
Label side
Disc tray 
3When loading or unloading other discs
DISC SKIP
11
: Keys and control used in the operations described on this page.
ÖDo not touch the played side of disc.
ÖLoading two discs together will cause malfunctioning.
ÖPlace the disc properly along the groove on the tray. (If the disc is not placed horizontally, malfunction will result.)
ÖA single CD (8 cm disc) can also be played.
ÖOrdinary CD single (8 cm) disc adapters sold in audio stores cannot be used with this unit.
ÖWhen loading/unloading a disc while the tray rotates, a malfunction might occur. Load/unload the disc when the tray does not rotate.
2Close the tray.
0
ALL TEXT SEARCH Remote control unit only
DISC
1 2 3 4 5
All DISC indicators " 
" light regardless of how many discs are present.
For most
After loading all the discs, operate in stop mode.
RC operation | GRC operation |
| Mode |
ALL TEXT | ENTER |
SEARCH | Text |
| |
FRAME/ | ENTER |
| |
TIME | All Text Search |
| |
| ENTER |
Search in progress or |
|
reading information | Blinks. |
|
DISC READING
Ç
D1 : CD TEXT
When the disc is
ÖThe information read into the CD player is cleared when the tray is opened. Therefore, perform this operation again if the tray was opened.
ÖRepeat the above procedure so that the complete disc information is read into the CD player.
ÖIn the case of a