Repeated playback

 

 

D-R350 (En)

18

Preparation

ÖLoad a disc in the CD player.

 

Ö Set the INPUT SELECTOR to ”CD“ on the

connected device such as AV CONTROL CENTER or receiver.

GRC operation : Complete the procedure in “Basic Operations

for the Graphical Remote Control Unit (GRC)” 90

: Keys and control used in the operations described on this page.

To repeat only the programmed tracks

RC operation

GRC operation

1Press so that the “PGM” indicator lights.

Mode

ENTER

P.MODE

PGM

ENTER

P.mode

ENTER

2Select the disk.

DISC SKIP

Disc Skip

REPEAT

ENTER

Go to step 3 within 8 seconds.

3Select the desired track No.

 

 

 

 

+10

1

2

3

1

2

3

4

5

4

5

6

6

7

8

9

0

7

8

9

 

 

 

 

 

0

+10

ENTER

Go to step 4 within 8 seconds.

4Set the entry.

P.MODE

P.mode

ENTER

5Repeat steps 2 – 4 above.

6Switch REPEAT ON.

REPEAT

Return

 

ENTER

 

Repeat

 

ENTER

Main unit operation

The current status is displayed when the key is pressed once. When it is pressed while the status is displayed, the repeat ON status can be set to OFF (or vice versa).

7Start playback.

PGM

6

ENTER

 

ENTER

PGM01 DISC?

ÖAll of the programmed tracks will be repeated.

ÖIn case only one track is programmed, only that track will be repeated.

ÖUp to 32 tracks can be programmed. When “FULL” is displayed, no more tracks can be programmed.

REPEAT ON

GRC operation

To display the current status, first select the Return icon and press the ENTER key, and then select the Repeat icon and press the ENTER key.

Pressing the ENTER key again while the status is displayed will set the repeat ON status to OFF (or vice versa).

To cancel repeated playback

Press the REPEAT key twice. (REPEAT ON → OFF)

(