Programmed play (PGM mode)

D-R350 (En)

Use the following procedure to program desired tracks in a

16 desired order. (Up to 32 tracks)

Preparation ÖLoad a disc in the CD player.

Ö Set the INPUT SELECTOR to ”CD“ on the connected device such as AV CONTROL CENTER or receiver.

GRC operation : Complete the procedure in “Basic Operations for the Graphical Remote Control Unit (GRC)”

90 : Keys and control used in the operations described on this page.

1Press so that the “PGM” indicator lights.

RC operation

GRC operation

 

Mode

 

ENTER

P.MODE

PGM

 

 

ENTER

 

P.mode

Blinks.

PGM01 DISC?

Do this operation in the stop mode.

2Program desired tracks.

ENTER

RC operation

GRC operation

1Select the disk.

DISC SKIP

Disc Skip

ENTER

REPEAT

Go to step 2 within 8 seconds.

2Select the desired track No.

 

 

 

 

+10

1

2

3

1

2

3

4

5

4

5

6

6

7

8

9

0

7

8

9

 

 

 

 

 

0

+10

ENTER

RC operation

Press the numeric keys as shown below....

To enter track No. 25: 005

Go to step 3 within 8 seconds.

3Set the entry.

P.MODE

P.mode

ENTER

4Repeat steps 1, 2 and 3 above.

3Start playback.

RC operation

GRC operation

6

ENTER

PGM01 D1 TNO.??

In the case of a CD-TEXT disc, the disc title is scrolled on the display.

PGM01 D1 TNO.25

Ç￿

PGM01 ABCDEFGH

In the case of a CD-TEXT disc, the track’s title is scrolled on the display.

GRC operation

Press the ENTER key after selecting each numeric icon. #

PGM01 D1 TNO.25

ÖTracks can also be selected by pressing the 4 or ¢ key.

ÖUp to 32 tracks can be programmed. When “FULL” is displayed, no more tracks can be programmed.

ÖIf you make a mistake, press the CLEAR key and enter the track No. from the beginning.

ÖWhen the 4or ¢key is pressed during playback, the track will be skipped in the direction of the pressed button.

ÖWhen the 4 key is pressed once during playback, the play position returns to the beginning of the current track being played.

To stop playback

Press the 7 key.

ÖThe programmed contents remain in memory.