In case of difficulty
| |
What appears to be a malfunction may not always be serious. If your unit should not perform as expected, consult the |
|
table below to see if the problem can be corrected before seeking help from your dealer or service representative. | 25 |
|
The microcomputer may fall into malfunction (impossibil- ity to operate, erroneous display, etc.) when the connection cords are unplugged while unit is ON or due to an external factor. In this case, execute the following method to reset the microcomputer and return it to normal condi- tion.
Unplug the power cord from the power socket and plug the power cord into the socket again.
ÖPlease be aware that resetting the CD player will erase all stored information and return it to the factory settings.
| Symptom | Cause | Remedy |
| |
|
|
|
|
| |
The unit is not turned ON with the | ÖPower plug is loosely connected. | ÖInsert the power plug firmly to the AC outlet. | |||
POWER key ON. (For U.S.A. and Canada) | ÖWith the power plug connected to the switched | ÖTurn the amplifier’s power ON. |
| ||
|
|
| AC outlet of an amplifier, the power of the |
|
|
The unit is not turned ON with the ON/ | amplifier is turned off. |
|
| ||
|
|
| |||
STANDBY( |
| ) key ON. (For other coun- |
|
|
|
tries) |
|
|
|
|
|
|
|
|
|
| |
Disc is loaded, player does not play. | ÖDisc is loaded upside down. | ÖLoad the disc again with its label side up. | |||
|
|
| ÖDisc is loose. | ÖInsert the disc properly. |
|
|
|
| ÖDisc is dirty. | ÖWipe off the dust on the surface of the disc | |
|
|
| ÖDisc is cracked. | referring to ”Disc handling precautions“.¢ | |
|
|
| ÖReplace the disc with a new one. |
| |
|
|
| ÖCondensation has occurred on the optical lens | ÖLeave the player for about 1 hour so that the | |
|
|
| unit. | condensation is removed. | ¢ |
|
|
|
|
|
|
No sound. |
|
| ÖPlay mode is not entered. | ÖPress the 6key. |
|
|
|
| ÖDisc is too dirty. | ÖWipe off the dust on the disc surface referring | |
|
|
| ÖDisc is cracked. | to ”Disc handling precautions“. | ¢ |
|
|
| ÖReplace the disc with a new one. |
| |
|
|
| ÖThe connection cords are inserted loosely. | ÖConnect all connection cords firmly. |
|
|
|
|
|
| |
Music is interrupted. (Sound is skipped.) | ÖDisc is too dirty. | ÖWipe off the dust on the disc surface referring | |||
|
|
| ÖDisc is cracked. | to ”Disc handling precautions“. | ¢ |
|
|
| ÖReplace the disc with a new one. |
| |
|
|
| ÖOscillation is applied to this unit. | ÖTry selecting a place where no strong vibra- | |
|
|
|
| tions occur by changing the installation place, | |
|
|
|
| etc. |
|
|
|
|
|
|
|