4Select the character type
Press the [38] button.
Each time the button is pressed the character type switches as
shown below.
Character type Display
Alphabet upper case "A"
Alphabet lower case "a"
Numbers and symbols "*"
5Select the characters
Press the [FM] or [AM] button.
Characters can be entered by using a remote with a number
buttons.
Example: If "DANCE" is entered.
Character Button #Times pressed
"D" [#3] 1
"A" [#2] 1
"N" [#6] 2
"C" [#2] 3
"E" [#3] 2
6Repeat steps 3 through 5 and enter the name.
7Exit name set mode
Press the [NAME] button.
•When operation stops for 10 seconds the name at that time is
registered, and Name Set mode closes.
•At registration, up to 12 characters can be entered into each
name.
•Memory numbers
- Total number of FM and AM stations: 30 stations
- 50 disc names can be registered in internal CD player and
external CD changer.
•The title of station/CD can be changed by the same operation
used to name it.
•If this unit is removed from the battery, DNPS/SNPS is erased.
Switching the half screen graphic.
1Select the half screen graphic
Press the [DISP] button.
Refer to <Display Mode Switching> (page 12).
2Switch the graphic
Press the [S.A] button.
Each time the button is pressed the half screen graphic switches
as shown below.
Screen Graphic
Graphic 1
Graphic 2
Graphic 3
The half screen graphic cannot be switched in the Standby mode.
Half Screen Graphic Switching
General features
— 14—
English
Attaching a title to a Station or CD.
1Receive/play the station/disc you want to attach a title to
•A title can't be attached to MD and MP3/WMA media.
•Disc Naming is unavailable when Magazine Random Play is
performed.
2Enter name set mode
Press the [NAME] button for at least 2 seconds.
"Name Set" is displayed.
3Move the cursor to the enter character position
Press the [4] or [¢] button.
Station/Disc Naming (SNPS/DNPS)
DPX-8030MD_U.S_r3 02.3.22 3:13 PM Page 14