English
— 42—
Troubleshooting Guide
The messages shown below display your systemscondition.
EJECT: No disc magazine has been loaded in the changer.
The disc magazine is not completely loaded.E01
No Disc: No disc has been loaded in the disc magazine.E02
➪Load a disc into the disc magazine.
Error 04: The CD is quite dirty. The CD is upside-down. The CD
is scratched a lot.
➪Clean the CD and load it correctly.
Error 05: The CD is upside-down.E05
➪Load the CD correctly.
Blank Disc: Nothing has been recorded on the MD.E10
No Track: No tracks are recorded on the MD, although it has a
title.E11
Error 12: MDs designed for data.
Error 15: Media was played that doesn’t have data recorded
that the unit can play. E15
Error 30: The faceplate of the slave unit being connected to
this unit has been removed.E30
➪Replace it.
Error 77: The unit is malfunctioning for some reason.E77
➪Press the reset button on the unit. If the "Error 77"
code does not disappear, consult your nearest
service center.
Mecha Error: Something is wrong with the disc magazine. Or the
unit is malfunctioning for some reason.E99
➪Check the disc magazine. And then press the reset
button on the unit. If the "Mecha Error" code does
not disappear, consult your nearest service center.
H-HOLD: The protective circuit in the unit activates when the
temperature inside the automatic disc changer
exceeds 60°C (140°F), stopping all operation.E0d
➪Cool down the unit by opening the windows or
turning on the air conditioner. As the temperature
falls below 60°C (140°F), the disc will start playing
again.
No Name: •Attempted to display DNPS during the CD play
having no disc names preset.E51
•Attempted to display SNPS during the receiving
session of the station having no station name
preset.E50
No Title: Attempted to display the disc title or track title while
the MD having no MD title/MD Group title is being
played.
No Text: • Attempted to display the disc text or track text
while the CD having no CD text is being played.
•Attempted to display the ID3 tag or contents
description while the MP3/WMA having no ID3 tag
or contents description is being played.
LOAD (Blink): Discs are being exchanged in the Disc changer.
File Check: The unit is reading the data on the disc.
Please Close: Attempted to operate the disabled button while the
disc is being ejected (faceplate being slid open).
DPX-8030MD_U.S_r3 02.3.22 3:14 PM Page 42