Kenwood DPX-8030MD - page 20

Temporarily have reception switched from stereo to mono to
reduce multi-path noise when listening to the FM station.
Press the [CRSC] button for at least 1 second.
Each time the button is pressed CRSC turns ON or OFF.
When it's ON, "CRSC ON" is displayed.
CRSC (Clean Reception System Circuit)
Calling up the stations in the memory.
1Select the band
Press the [FM] or [AM] button.
2Call up the station
Press the [#1] —[#6] button.
Preset Tuning
Putting a station with good reception in the memory
automatically.
1Select the band for Auto Memory Entry
Press the [FM] or [AM] button.
2Enter Function Setting mode
Press the [FNC] button for at least 1 second.
"FUNCTION SET" is displayed.
3Select the Auto Memory Entry mode
Press the [FM] or [AM] button.
Select the "AME Ready" display.
4Open Auto Memory Entry
Press the [38] button for at least 2 seconds.
When 6 stations that can be received are put in the memory
Auto Memory Entry closes.
Auto Memory Entry
Putting the station in the memory.
1Select the band
Press the [FM] or [AM] button.
2Select the frequency to put in the memory
Press the [4] or [¢] button.
3Put the frequency in the memory
Press the [#1] — [#6] button for at least 2 seconds.
The preset number display blinks 1 time.
On each band, 1 station can be put in the memory on each [#1]
— [#6] button.
Station Preset Memory
Tuner features
— 20—
English
DPX-8030MD_U.S_r3 02.3.22 3:13 PM Page 20