This function reproduces many different virtual sound fields.
1Enter the DSP control mode
Press the [DSP] button.
"DSP CONTROL MODE" is displayed.
2Selecting the sound field setting
Press the [DSP] button.
Each time the button is pressed the sound field setting switches
as shown below.
Sound Field Setting
Turning the DSP effects ON or OFF.
A DSP is a device which uses digital control to correct the audio
signal and produce sound effects that can compensate for the
small passenger compartment of a vehicle.
Turn DSP System ON
Press the [DSP] button.
"DSP CONTROL MODE" is displayed.
Turn DSP System OFF
Press the [DSP] button for at least 1 second.
"DSP OFF" is displayed.
DSP(Digital Signal Processor) System
Non-Fading level cannot be preset into the memory.
— 17—
Setting Display
Stadium "STADIUM"
Concert Hall "CONCERT"
Club Disco "CLUB DISCO"
Church "CHURCH"
Listening "LISTENING"
Bypass "BYPASS"
When operation stops for 10 seconds, the Sound Field Setting
closes.
Recall the preset equalizer curve classified in groups.
1Enter the Equalizer control mode
Press the [EQ] button.
"EQ CONTROL MODE" is displayed.
2Select an equalizer curve
Press the [EQ] button.
Each time the button is pressed the preset equalizer curve
switches.
Setting Display
Flat "Flat"
Rock "Rock"
Pops "Pops"
Dance "Dance"
Vocal "Vocal"
When Equalizer Curve is adjusted, the selection starts from "User".
Ending of Equalizer control mode
Press the [EQ] button for at least 1 second.
When operation stops for 10 seconds, the Equalizer control
mode closes.
Preset Equalizer Curve Selection
DPX-8030MD_U.S_r3 02.3.22 3:13 PM Page 17