Manuals / Brands / Home Audio / CD Player / Kenwood / Home Audio / CD Player

Kenwood DPX501U, DPX701U Notes on Use of the USB Device, Available USB Devices, About the Connection of the USB Device, About USB Device Operation

1 61

Download 61 pages, 1.14 Mb

About USB device

Notes on Use of the USB Device

This unit can play audio files stored in the flash memory and digital audio player that have a USB port (these devices are referred to as USB devices in this document).

The following restrictions are placed on the types and usage of available USB devices:

Available USB Devices

•USB devices belonging to the USB mass storage class.

•USB devices whose maximum current consumption is 500 mA or less.

For the supported formats and USB device types, refer to http://www.kenwood.mediamanager.jp/.

•USB Mass Storage Class:

USB devices that the PC can recognize as an external storage without using any special driver or application software.

•Contact the sales agent as to whether your USB device conforms to the USB mass storage class specs.

•Using an unsupported USB device can result in abnormal playback or display of the audio file.

Even if you use the USB device conforming to the above specs, audio files cannot be played normally depending on the type or condition of the USB device.

About the Connection of the USB Device

•Do not directly connect the USB device to the USB connector on the panel. Connect it using a cable

•When connecting the USB drive, usage of the supplied USB cable is recommended.

Normal playback is not guaranteed when a cable other than the USB compatible cable is used. Connecting a cable whose total length is longer than 5 m can result in abnormal playback.

•You cannot connect a USB device via a USB hub.

•Install the USB device in the place where it will not prevent you from driving your vehicle properly.

•Do not leave the USB device in the vehicle for a long time. It can deform or damage due to direct sunlight, high temperature, etc.

•Take backups of the audio files used with this unit. The files can be erased depending on the operating conditions of the USB device.

We shall have no compensation for any damage arising out of erasure of the stored data.

•Leave the cap on when not using an USB device.

About USB Device Operation

•USB device operation is the same as audio file operation unless otherwise some notice is indicated.

•USB source is recognized as CD source on the connected unit.

10 English

Contents

Page CD/USB device/Audio file/External Basic Operations of remote control Accessories/ Installation Procedure Connecting Wires to Terminals To prevent injury or fire, take the following precautions: To prevent damage to the machine, take the following precautions: Do Not Load 3-in.CDs in the CD slot Lens Fogging How to reset your unit Cleaning the Unit Before using this unit for the first time About DAB Tuner control The marking of products using lasers (Except for some areas) Handling CDs When using a new CD CD accessories CD cleaning Removing CDs Playable Audio file Playable AAC file Playable MP3 file Playable WMA file Playable Storage media Playing order of the Audio file Notes on Use of the USB Device Available USB Devices About the Connection of the USB Device About USB Device Operation Power Turning ON the Power Press the [SRC] button Turning OFF the Power Press the [SRC] button for at least 1 second Attenuator Press the [ATT] button System Q 2Select the Sound type Press the [Q] button Sound setting Adjusting the detail of Audio Control 1Select the Basic Audio item 2Enter Detail adjustment mode of Audio Control Press the [VOL] knob for at least 1 second 3Select the Detail Audio item to adjust Press the [VOL] knob Audio Setup 2Enter Audio Setup mode Press the [VOL] knob for at least 1 second 3Select the Audio Setup item to adjust Press the [VOL] knob 4Setup the Audio item Turn the [VOL] knob Subwoofer Output Push the Control knob toward [AM] for at least 2 seconds TEL Mute When a call comes in Listening to the audio during a call Switching Display Press the [DISP] button In Tuner source Information In CD & External disc source Graphic part Display Switching 2Enter graphic display select mode 3Select the graphic part display Push the Control knob towards [4] or [¢] 4Exit graphic display select mode Press the [DISP] button Text Selection for Display 2Enter text select mode Press the [DISP] button for at least 1 second 3Select the text 4Exit text select mode The text display in the Upper text display part The text display in the Middle text display part The text display in the Lower text display part Font Color Select 1Enter text select mode 2Switch from text selection to Font Color selection Select the row (Display Type C/ Display Type D only) Select the Font Color Tuning 2Select the band 3Tune up or down band Direct Access Tuning 1Select the band Station Preset Memory Preset Tuning Select the frequency to put in the memory Recall the station Push the Control knob towards [4] or DPX701U Traffic Information Press the [TI] button Push the Control knob towards ] or PTY (Program Type) 1Enter PTY mode 2Select the Program Type No Program Type Changing Language for PTY Function 2Enter Changing Language mode Press the [TI] button 3Select the language DPX701U LanguageDisplay Playing CD & Audio file When a disc is inserted Pause and play Eject the CD Press the [0] button Playing USB device 1Select a source other than the USB device Press the [SRC] button 2Connect the USB device Removing the USB Device 2Remove the USB device 1 Select a source other than the USB device 2 Select USB source Display examples: 68 139.5 w051 143.3 c Pr18 selected as a source Track/File Search Disc Search/Folder Search Direct Track/File Search 1Enter the track/file number 2Do Track/File Search Scan Play 1Start Scan Play Press the [SCAN] button 2Release it when the song you want to listen to is played Random Play Scrolling the file/ folder name display File Select mode Folder Select 1 mode 1Enter Folder Select 1 mode Press the [F.SEL] button 2Select the folder level Selecting a folder in the same level Push the Control knob towards [4] or [¢] Returning to the top level* Press the [3] button Switching the Play mode Press the [S.MODE] button Play mode Letter Seek 1Enter the Letter Seek mode Menu System 1Enter Menu mode Press the [MENU] button for at least 1 second. "MENU" is displayed 2Select the menu item 3Set the menu item Security Code 2Enter Menu mode 3Enter Security Code mode 4Select the digits to enter 5Select the Security Code numbers Manual Clock Adjustment 1Select Clock Adjustment mode 2Enter Clock Adjust mode Press the Control knob for at least 1 second. The clock display blinks 3Adjust the hours Display Illumination Control Dimmer Switching preout Built-inAmp Setting Dual Zone System Setting B.M.S. (Bass Management System) B.M.S. Frequency Offset AMP Control 1Select AMP Control mode 2Enter AMP Control mode News Bulletin with Timeout Setting Display and Setting Local Seek Tuning Mode Tuning mode Restricting RDS Region (Region Restrict Function) Auto TP Seek Monaural Reception External Display Control Disc Naming (DNPS) Character Button Times pressed 8Repeat steps 5 through 7 and enter the name 9Exit Menu mode Text Scroll Built-inAuxiliary input Setting Power OFF Timer CD Read Setting Voice Index ACDrive firmware version display 2Display the ACDrive firmware version Push the Control knob towards [4] or [¢] Unique ID display 1Select the unique ID display mode Audio Preset Recall Press the Control knob for at least 1 second 5Select the Audio Preset Recall 6Recall the Audio Preset Demonstration mode Setting Page VOL SRC ATT AUD Not Used [AUD] button Dual Zone System [2-ZONE]button [5]/ [∞] buttons In Tuner source Accessories Installation Procedure Page Connector Function Guide 2WARNING Connecting the ISO Connector For General Motors For TOYOTA/ SCION Installing the Unit USB Device Connection Removing the Hard Rubber Frame (escutcheon) General Tuner source Disc source Audio file source USB device source The messages shown below display your systems condition Page FM tuner section MW tuner section LW tuner section CD player section USB Interface