Removing the Hard Rubber Frame (escutcheon)

1Engage the catch pins on the removal tool 2 and remove the two locks on the lower level. Lower the frame and pull it forward as shown in the figure.

2When the lower level is removed, remove the upper two locations.

•The frame can be removed from the top side in the same manner.

Removing the Unit

1Refer to the section <Removing the Hard Rubber Frame> and then remove the hard rubber frame.

2Remove the Hex-head screw with integral washer (M4X8) on the back panel.

3Insert the two removal tools 2 deeply into the slots on each side, as shown.

4Lower the removal tool towards the bottom, and pull out the unit halfway while pressing towards the inside.

•Be careful to avoid injury from the catch pins on the removal tool.

5Pull the unit all the way out with your hands, carefully not to drop it.

English 53