3-4 Inserting discs
Up to 403 discs can be loaded in the stocker. Disc exchange also is possible during playback.
The discs can be changed during playback without stopping the currently played disc.
Be sure to operate a button when opening/closing the disc door or rotating the stocker. Never attempt to move the stocker with your hand. Never let your hand or any object enter inside the unit.
Operation procedure
1.Press the OPEN/CLOSE button on the player main unit to open the disc door. (Pressing the button again closes the disc door.)
This unit cannot play back 8 cm discs. Do not attempt to play an 8 cm disc for this may result in malfunction.
÷Place the disc to be played along the groove on the slot.
÷Do not insert more than one disc in a slot.
÷When handling a disc, take care not to touch the disc surface.
÷Please do not use discs which are not round because they may cause malfunction.
2.Turn the DISC knob and bring the slot with the disc to be placed to the front.
÷If you are operating the remote, press the DISC +(up), – (down) button.
3.Insert the disc vertically.
÷Insert it so that the side to be played back faces leftward.
disc label side
Stocker
4.Repeat 2 and 3 to insert discs.
5.Press the OPEN/CLOSE button on the player to close the disc door.
÷When the disc door closes :
The unit starts detection of discs in the stocker (“DETECTION” is displayed during this).
Ejecting the disc
Operation procedure
1.Turn the DISC knob on the main unit to select a disc.
2.Press the EJECT 0 button.
When “REMOVE DXXX” is displayed :
A disc is inserted in the slot with the same disc number as the disc being loaded. It is not permitted to insert another disc in a slot from which the disc has been loaded. Remove the inserted disc and insert it in an idle slot.
Chapter 3: Basic Operation
3-5 In regard to ALL DATA READ mode
The disc information for all discs will be read. We recommend to execute this mode before playback after discs have been exchanged.
Close the disc door before operation.
Operation procedure (remote)
1.Press the MODE button.
2.Press the DISC +(up), – (down) button, then select “ALL DATA READ”.
3.Press the SET button.
÷To display the title on a LCD remote control unit (provided with a KENWOOD Receiver or optional), perform the all data read operation first, and operate the LCD remote control unit with the disc door closed. For the operation of the LCD remote control unit, refer to the instruction manual provided with your receiver or LCD remote control unit.
÷If you are operating the keyboard remote, press the
ALL DATA READ button. |
÷To quit ALL DATA READ mode, Press the 7button.
8 Chapter 7 Chapter 6 Chapter 5 Chapter 4 Chapter 3 Chapter 2 Chapter 1 Chapter
29