Chapter 8 Chapter 7 Chapter 6 Chapter 5 Chapter 4 Chapter 3 Chapter 2 Chapter 1

Chapter 6: Specifying and Using Disc or Track Data

Although all operations can be controlled from both the standard remote and Keyboard remote control units, do not change the remote control unit in the middle of operation such as character input. Otherwise, characters may not be input correctly. (DV-5900M only)

b : Operation using the keyboard remote control unit (DV-5900M only)

Operation procedure

1.Check that the unit is in the normal play TRACK

mode.¤

2.Press the USER FILE NAME button.

÷When the USER FILE NAME button is pressed during FILE NAME INPUT mode, the FILE NAME INPUT mode is cancelled.

3.Press the DISC UP, DISC DOWN button to select the user file number you want to assign a title name, and press the SET button.

4.Enter the file name using the character input buttons.

÷A file name can be registered using up to 20 characters.

÷If you commit a mistake in the character button input, press the DELETE button and restart the

input from the beginning.

P

÷ To enter a space, press the SPACE button.

5.Press the ENTER button.

To change the character type

Holding the SHIFT button down, press a character or numeric button.

c : To change a file name

(Standard remote/Keyboard remote)

Operation procedure

1.Make the unit ready for character input.

With the standard remote:

Perform steps 1 to 6 of “Assigning user file names”.

O

With the keyboard remote:

Perform steps 1 to 3 of “Assigning user file names”.

2.Press the cursor left, right button to move the cursor to the character to be changed.

3.Enter the file name using the character input buttons.

÷No character can be changed if 20 characters have already been input. In this case, delete unnecessary characters then enter the desired correction characters.

÷If the file name to be changed is too long to be displayed on the display section, press the cursor left/right button to scroll the display so that the characters hidden until then appear.

÷A file name can be registered using up to 20 characters.

Standard remote

÷If a desired character is not provided on the remote control buttons, input the character as follows. Press the CHARAC. 4, ¢(down/up) buttons or rotating the DISC knob on the main unit until the desired character is displayed in the flashing cursor position. Then, press the SET button.

÷The type of characters (capital letters or numbers/ symbols) is switched each time the CHARAC. button is pressed.

Keyboard remote (DV-5900M only)

÷To input a symbol, press and hold the SHIFT button while press the desired numeric/symbol button.

4.Press the ENTER button.

d : To delete a file name

(Standard remote/Keyboard remote)

Operation procedure

1.Make the unit ready for character input.

With the standard remote:

Perform steps 1 to 6 of “Assigning user file names”.

O

With the keyboard remote:

Perform steps 1 to 3 of “Assigning user file names”.

2.Press the cursor left, right button to move the cursor to the character to be deleted.

3.Press the DELETE button.

4.Press the ENTER button.

60