![](/images/new-backgrounds/59675/5967511x1.webp)
hints
● Use fresh ingredients |
● Don’t cut food too small. Fill the width of the large feed tube |
fairly full. This prevents the food from slipping sideways during |
processing. Alternatively use the small feed tube. |
● When using the chipper disc, place ingredients horizontally. |
● When slicing or shredding: food placed upright f comes out |
shorter than food placed horizontally g. |
● There will always be a small amount of waste on the plate or in |
24 mill
Use the mill for milling herbs, nuts and coffee beans.
blade unit
sealing ring
jar
sprinkler lid
the bowl after processing. |
f g
P |
| P |
|
0 | 1 | 0 | 1 |
| 2 |
| 2 |
| 3 |
| 3 |
| 4 |
| 4 |
| 5 |
| 5 |
| 6 |
| 6 |
| 7 |
| 7 |
| 8 |
| 8 |
safety
●Never fit the blade unit to your machine without the jar fitted.
●Never unscrew the jar while the
●Don’t touch the sharp blades. Keep the blade unit away from children.
●Never remove the
important
●To ensure long life of your mill, never run for longer than 30 seconds. Switch off as soon as you’ve got the right consistency.
●Don’t process spices - they may damage the plastic.
●The machine won’t work if the mill is fitted incorrectly.
●Use for dry ingredients only.
23 citrus press
| Use the citrus press to | i | |
| squeeze the juice from citrus | ||
|
| ||
|
|
| |
| fruits (eg oranges, lemons, |
|
|
| limes and grapefruits). |
| |
|
|
| |
cone |
| h | |
sieve |
| ||
|
|
to use your mill
1 | Put your ingredients into the jar. Fill it no more than half full. |
2 | Fit the sealing ring into the blade unit. |
3 | Turn the blade unit upside down. Lower it into the jar, blades |
| down. |
4 | Screw the blade unit onto the jar until it is finger tight. |
5 | Place the mill onto the power unit and turn to lock (see “to use |
| your liquidiser”). |
to use the citrus press
1 | Fit the drive shaft and bowl |
|
|
| onto the power unit. |
|
|
2 | Fit the sieve into the bowl - | P |
|
| ensuring the sieve handle is | 0 | 2 |
|
|
| 1 |
locked into position directly over the bowl handle h .
3Place the cone over the drive
shaft turning until it drops all the way down i
4Cut the fruit in half. Then switch on and press cone.
3 4 5 6 7
8
.
the fruit onto the
6 | Switch on to maximum speed or use the pulse control. |
7 | After milling, you can replace the blade unit with the sprinkler lid |
| and shake out your food. |
●The sprinkler lid is not airtight. hints
●Herbs are best milled when clean and dry.
●The citrus press will not operate if the sieve is not locked correctly.
5