NordicTrack NTTL24080 manual Performant Lubetm Walking Belt, HOW to Plug in the Power Cord

TREADMILL OPERATION

THE PERFORMANT LUBETM WALKING BELT				This product is equipped with a cord having an equip-
				ment-grounding conductor and a grounding plug. Plug
Your treadmill features a walking belt coated with				the power cord into a surge protector, and plug the
PERFORMANT LUBETM, a high-performance lubricant.				surge protector into an appropriate outlet that is
IMPORTANT: Never apply silicone spray or other				properly installed and grounded in accordance
substances to the walking belt or the walking				with all local codes and ordinances.
platform. They will deteriorate the walking belt and
cause excessive wear.				This product is for use on a nominal 120-volt circuit,
				and has a grounding plug that looks like the plug
HOW TO PLUG IN THE POWER CORD				illustrated in drawing 1 below. A temporary adapter
				that looks like the adapter illustrated in drawing 2 may
DANGER: Improper connection				be used to connect the surge protector to a 2-pole
				receptacle as shown in drawing 2 if a properly
				grounded outlet is not available.
of the equipment-grounding conductor can
result in an increased risk of electric shock.				The temporary adapter should be used only until a
Check with a qualified electrician or service
				properly grounded outlet (drawing 1) can be installed
representative if you are in doubt as to
				by a qualified electrician.
whether the product is properly grounded. Do
not modify the plug provided with the prod-				The green-colored rigid ear, lug, or the like extending
uctÑif it will not fit the outlet, have a proper
				from the adapter must be connected to a permanent
outlet installed by a qualified electrician.
				ground such as a properly grounded outlet box cover.
				Whenever the adapter is used it must be held in place
Your treadmill, like any other type of sophisticated				by a metal screw. Some 2-pole receptacle outlet box
				covers are not grounded. Contact a qualified
electronic equipment, can be seriously damaged by
				electrician to determine if the outlet box cover is
sudden voltage changes in your homeÕs power.
				grounded before using an adapter.
Voltage surges, spikes, and noise interference can
result from weather conditions or from other
appliances being turned on or off. To decrease the
possibility of your
treadmill being	1		Grounded Outlet Box
damaged, always use
					Treadmill Power Cord
a surge protector (not
included) with your			Grounding Pin
treadmill.				Grounding Plug	Grounding Plug
Surge protectors are
sold at most hardware					Grounding Pin
stores and department		Grounded Outlet
stores. Use only a UL-
listed surge protector,
rated at 15 amps, with	2
a 14-gauge cord of five		Grounded Outlet Box
feet or less in length.
			Adapter
This product must be				Grounding Pin
grounded. If it should
malfunction or break				Grounding Plug		Surge Protector
down, grounding
provides a path of least		Lug
resistance for electric
		Metal Screw
current to reduce the
risk of electric shock.

9