Kenwood FP615 additional attachments, to use your food processor, to use your liquidiser, hints

Models: FP615 FP620

1 10
Download 10 pages 2.36 Kb
Page 5
Image 5

additional attachments

Not all of these attachments listed below will be included with your food processor. Please refer to your content list supplied. To buy an attachment not included in your pack, contact the dealer from whom you purchased your appliance.

￿knife blade

￿twin beater geared whisk

￿maxi-blend canopy

￿thick slicing/coarse shredding disc

￿21 thin slicing/fine shredding disc (FP620 only) ￿22 geared citrus press (if supplied)

￿23 KENSTORE™ attachments carousel

to use your food processor

When using the food processor bowl, the liquidiser outlet cover must be fitted and locked in position or the processor will not work.

1Fit the bowl. Place the handle towards the back, lower and turn clockwise until it locks ￿.

2Then fit the detachable shaft ￿ over the power unit fixed shaft.

3Fit an attachment over the drive shaft.

Always fit the bowl and attachment onto the machine before adding ingredients.

4Fit the lid onto the bowl ￿ – turn clockwise until the arrow on the lid aligns with the line on the power unit ￿.

5Switch on and select a speed.

The processor won’t work if the lid or outlet cover are fitted incorrectly.

Use the pulse (P) for short bursts. The pulse will operate for as long as the control is held in position.

6Reverse the above procedure to remove the lid, attachments and bowl.

Always switch off before removing the lid. important

Your processor is not suitable for crushing or grinding coffee beans, or converting granulated sugar to caster sugar.

When adding almond essence or flavouring to mixtures avoid contact with the plastic as this may result in permanent marking.

to use your liquidiser

1Fit the sealing ring ￿ into the blade unit ￿ - ensuring the seal is located correctly. Leaking will occur if the seal is damaged or not fitted correctly.

2Screw the jug onto the blade unit.

3Put your ingredients into the jug.

4Put the filler cap in the lid, then turn.

5Turn the lid in a clockwise direction to lock onto the jug.

6Lift off the liquidiser outlet cover ￿.

7Place the liquidiser onto the liquidiser outlet and turn to lock ￿. important

The liquidiser attachment will work only with the processor bowl and lid in position.

When using the liquidiser outlet we recommend that

there are no tools in the bowl.

8 Select a speed or use t he pulse control.

hints

When making mayonnaise, put all the ingredients, except the oil into the liquidiser. Then with the machine running, pour the oil into the filler cap and let it run through.

Thick mixtures, eg pates and dips, may need scraping down. If it’s difficult to process, add more liquid.

Ice crushing - operate the pulse in short bursts until crushed to the desired consistency.

Liquids should be allowed to cool to room temperature before blending.

To ensure the long life of your liquidiser, never run it for longer than 60 seconds. Switch off as soon as you’ve got the right consistency.

Don’t process spices - they may damage the plastic.

The machine won’t work if the liquidiser is fitted incorrectly.

Don’t put dry ingredients into the liquidiser before switching on. If necessary, cut them into pieces; remove the filler cap; then with the machine running, drop them through one by one.

Don’t use the liquidiser as a storage container. Keep it empty before and after use.

Never blend more than 112 litres (2pts 12floz) - less for frothy liquids like milkshakes.

3

Page 5
Image 5
Kenwood FP615 additional attachments, to use your food processor, to use your liquidiser, there are no tools in the bowl