slicing/shredding discs
reversible slicing/shredding discs - thick , thin
Use the shredding side for cheese, carrots, potatoes and foods of a similar texture.
Use the slicing side for cheese, carrots, potatoes, cabbage, cucumber, courgette, beetroot and onions.
safety
●Never remove the lid until the cutting disc has completely stopped.
●Handle the cutting discs with care - they are extremely sharp
to use the cutting discs
1Fit the drive shaft and bowl onto the power unit.
2Holding by the centre grip , place the disc onto the drive shaft with the appropriate side uppermost .
3Fit the lid.
4Choose which size feed tube you want to use. The pusher contains a smaller feed tube for processing individual items or thin ingredients.
To use the small feed tube - first put the large pusher inside the feed tube.
To use the large feed tube - use both pushers together.
5Put the food in the feed tube.
6Switch on and push down evenly with the pusher - never put your fingers in the feed tube.
hints
●Use fresh ingredients
●Don’t cut food too small. Fill the width of the large feed tube fairly full. This prevents the food from slipping sideways during processing. Alternatively use the small feed tube.
●When slicing or shredding: food placed upright comes out shorter than food placed horizontally .
●There will always be a small amount of waste on the plate or in the bowl after processing.
citrus press (if supplied)
Use the citrus press to squeeze the juice from citrus fruits (eg oranges, lemons, limes and grapefruits).
cone
sieve
to use the citrus press
1Fit the drive shaft and bowl onto the power unit.
2Add the sieve and turn clockwise until the interlock fin on the sieve aligns with the line on the power unit .
3Place the cone over the drive shaft turning until it drops all the way down .
4Cut the fruit in half. Then switch on and press the fruit onto the cone.
●The citrus press will not operate if the sieve is not locked correctly.
KENSTORE™ attachments carousel
Your food processor is supplied with an attachment storage carousel that fits inside the bowl.
to use the storage carousel
1Fit the knife blade to the bowl.
2Then fit the whisk, discs and canopy into the carousel .
3Fit the carousel over the knife blade and place the processor lid on top .
care & cleaning
●Always switch off and unplug before cleaning.
●Handle the blades and cutting discs with care - they are extremely sharp.
●Some foods may discolour the plastic. This is perfectly normal and won’t harm the plastic or affect the flavour of your food. Rub with a cloth dipped in vegetable oil to remove the discolouration.
power unit
●Wipe with a damp cloth, then dry. Ensure that the interlock area is clear of food debris.
●Wrap excess cord around the bracket at the back of the appliance.
liquidiser
1Empty the jug before unscrewing it from the blade unit.
2Wash the jug by hand.
3Remove and wash the sealing ring.
4Don’t touch the sharp blades - brush them clean using hot soapy water, then rinse thoroughly under the tap. Don’t immerse the blade unit in water.
5Leave to dry upside down.
twin beater geared whisk
●Detach the beaters from the drive head by gently pulling them free. Wash in warm soapy water.
●Wipe the drive head with a damp cloth, then dry. Do not immerse the drive head in water.
all other parts
●Wash by hand, then dry.
●Alternatively they can be washed on the top rack of your dishwasher. A short low temperature programme is recommended.
5