![νSleep operation](/images/new-backgrounds/27863/2786345x1.webp)
6 Within 1 minute, press the PRESET ( or
) button to specify the minutes to start, then press the MEMORY button.
λThe timer playback starting time, function, and volume will be displayed, and then the unit will enter the
λ"" will appear and the current time will be displayed.
To cancel the timer playback:
Press the ON/STANDBY button to turn the power on.
7 When the preset time is reached, playback will start.
The volume will increase gradually until it reaches the volume you were listening at before your system enters the timer
8 If you select CD, the unit will enter the
To reset or change the timer setting:
Perform "Timer playback" from the beginning.
Notes:
λOnce the time is set, the setting will be retained until a new time is entered.
λWhen performing timer playback using another unit connected to the VIDEO/AUX IN sockets, select "VIDEO/AUX" in step 2. At this time, only this unit will be turned on or enter the power
νSleep operation
1 Play back the desired sound source.
2 Press the SLEEP button.
To change the sleep time:
Press the SLEEP button repeatedly to select the desired sleep time. The time will decrease as follows.
The amount of sleep time can also be changed whilst in the sleep mode.
3:00 | 2:00 | 1:30 | 1:00 |
OFF 15 30
3 Your system will enter the power
The volume will be turned down 1 minute before the sleep operation finishes.
To cancel the sleep operation:
Press the ON/STANDBY button whilst the sleep timer is set.
To confirm the remaining sleep time:
Press the SLEEP button once whilst the sleep timer is set.
The remaining sleep time is displayed for about 3 seconds.
νTo use timer and sleep operation together
Example: To fall asleep and wake to the same radio station
You can play back the same source only (the function cannot be switched).
1 Set the sleep time (see above, steps 1 - 2).
2 Whilst the sleep timer is set, set the desired playback time (steps 4 - 6, pages 22 - 23).
Advanced Features - Timer and Sleep Operation -
23