Enhancing Your System
Advanced Features | - Enhancing Your System - |
24
The connection lead is not included. Purchase a commercially available lead as shown below.
VCR, DVD, etc.
To the line output sockets
White Red
Red White
MD recorder
RCA lead (not supplied)
To the optical line input socket
| Connection cable |
Headphones | for digital recording |
|
νListening to the playback sounds from VCR, DVD, etc.
1Use a connection lead to connect the VCR, DVD, etc. to the VIDEO/ AUX IN sockets.
When using video equipment, connect the audio output to this unit and the video output to a television.
2 Press the ON/STANDBY button to turn the power on.
3 Press the FUNCTION button until "AUX" appears on the display.
When operating with the remote control, press the VIDEO/AUX button.
4 Play the VCR, DVD, etc.
Note:
To prevent hum interference, place this unit away from a television.
νTo record CD signals on MDs
The digital signal from this unit can be recorded by MiniDisc recorders, etc.
1 Remove the DIGITAL OUT socket cover.
2 Use a connection cable for digital recording to connect the unit to the OPTICAL IN socket of a MiniDisc recorder, etc.
3 Press the ON/STANDBY button to turn the power on.
4 Put the MiniDisc recorder, etc. in the recording mode.
5 Play a CD on this unit.
Note:
Only CD signals can be output.
νHeadphones
λBefore plugging in or unplugging the headphones, reduce the volume.
λBe sure your headphones have a 3.5 mm (1/8") diameter plug and are between 16 ohms and 50 ohms impedance. The recommended impedance is 32 ohms.
λPlugging in the headphones disconnects the speakers automatically. Adjust the volume using the VOLUME buttons.