CIRCULATION OPERATION
■When the room temperature is higher than the thermostat set temperature, only the fan operates to circulate the upper hotter air downwards. This makes temperature distribution of the room evenly at heating.
1 Press the
(START/STOP) button
●Operation start with a signal received sound “beep”.
STOP Press the
(START/STOP) button
● Make sure you have been select the 
(Circulate) mode by using
the 
(FUNCTION) Button.
● You can select the fan speed and desired temperature.
● This operation is useful in winter when using other heating equipment.
HOW TO SET THE SLEEP TIMER
Mode |
|
|
|
| Indication |
| |||
Sleep timer |
| 4 | 1 hour | 4 2 hours | 4 3 hours | 4 7 hours |
|
| |
|
|
| |||||||
|
|
|
| Sleep timer off 1 |
| ||||
|
|
|
|
|
| ||||
|
|
|
|
|
| ||||
|
|
|
|
|
|
|
|
|
|
Sleep Timer: The device will continue working for the designated number of hours and then turn off.
Point the signal window of the remote controller toward the indoor unit, and press the SLEEP button.
The timer information will be displayed on the remote controller. The TIMER lamp lights with a beep from the indoor unit.
Example: Setting 3 hours sleep time.
How to Cancel Reservation
Point the signal window of the remote controller toward the indoor unit, and press the 
(CANCEL) button.
The 
(RESERVED) sign goes out with a beep and the 
(TIMER) lamp turns off on the indoor unit.
NOTE
If you set the sleep timer when the
– 8 –
