Radio Shack 49-2570 o House Code, o Flashing Alert Unit Code, o Silent Alarm, o Dial Delay

49-2570.fm Page 8 Wednesday, August 18, 1999 3:59 PM

Place a check mark next to any settings you want to discuss with ORCA, and refer to these settings when you call them to set up service.

o House Code

Preferred setting: House Code A

Can be any House Code (A-P). Your system can control all mod- ules set to the same house code.

o Flashing Alert Unit Code

Preferred setting: Unit Code 16

Can be any Unit Code (1-16). A light connected to a module set to the same House and Unit Codes you select flashes when the alarm is tripped, and can be controlled by the SECURITY LIGHT buttons on the handheld remote. This light also turns on at dusk and turns off around 11:30 PM when the sys- tem is armed in the away mode.

o Silent Alarm

Preferred setting: Audible alarm

Can be set to only call ORCA Monitoring Services and not sound the siren at all. If you select silent alarm, you will hear no indi- cation that the system has been tripped.

o Lived-In Look Unit Codes

Preferred setting: 2, 3, and 4

You can select any three Unit Codes. Modules set to the same House Code and the three Unit Codes you select turn on and off at random times after dusk when you arm the system in the away mode. This gives your home a lived-in appearance.

o Entry and Exit Delays

Preferred setting: 60-second exit delay; 30-second entry delay

Each can be set from 0 to 1000 seconds.

o Dial Delay

Preferred setting: 40 Seconds

Can be set from 0 to 1000 sec- onds. This sets how long the con- sole waits after it has been tripped before it calls ORCA Monitoring Services.

8