Radio Shack 49-2570 owner manual Resetting Console, Using Security Light, Using BRIGHT/DIM

49-2570.fm Page 27 Wednesday, August 18, 1999 3:59 PM

Using SECURITY LIGHT

Use the SECURITY LIGHT button on the handheld remote control or the con- sole to turn on/off a light module set to the same House and Unit Code as you selected when you set up the system.

AUTOMATIC		ARM
MESSAGE		AWAY		DI	SAR		M
DIALLER
plug'n power
			SECURITY
C O M P A T I B L E
		ON	LIGHT OFF
	ON					OFF

Using BRIGHT/DIM

Use the BRIGHT/DIM button on the handheld remote control to brighten or dim lights connected to Plug ´n Power lamp modules.

Turn on the module by pressing the re- mote control ON button that corre- sponds to the module’s Unit Code. Then press and hold BRIGHT or DIM on the remote control until the light reach- es the desired brightness.

O	• A		•	C	BRIGHT	DIM
•				•
M				E
•				•	ENTRY
K				G
					DELAY	INSTANT
•		I	•

Note: You cannot brighten or dim lamps connected to appliance mod- ules.

RESETTING THE

CONSOLE

To remove all sensor transmitters from memory, set the console’s INSTALL/

RUN 1/RUN 2 switch to INSTALL. Then press PANIC, ARM HOME, and ARM

AWAY at the same time.

Note: This does not clear the settings that ORCA Monitoring Services pro- grammed into your system during ini- tialization.

27