Radio Shack 49-2570 owner manual Installing The Handheld Remote Control

49-2570.fm Page 14 Wednesday, August 18, 1999 3:59 PM

Notes:

• You can add any combination of

up to eight Plug ´n Power

4.Set the house code on the remote control to the same letter as you selected when you set up service.

remote controls.

• When you press a button, the

BATTERY indicator on the

remote control lights to show

the battery is good.

O	• A •			C
•				•
M				E
•				•
K				G
•		I	•

BRIGHT DIM

ENTRY

DELAY INSTANT

INSTALLING THE HANDHELD REMOTE CONTROL

1.Press the tab on the battery com- partment cover and lift off the cover.

2.Install four AAA alkaline batteries (Cat. No. 23-555) in the handheld remote control’s battery compart- ment, according to the polarity symbols (+ and –) marked inside the compartment.

3.Be sure the console’s INSTALL/ RUN 1/RUN 2 switch is set to

INSTALL.

5.Press ARM HOME or ARM AWAY on the handheld remote control. The console sounds a tone.

PANIC

ARM

HOME

ARM

DISARM

AWAY

SECURITY

ON LIGHT OFF

Note: If you do not hear a tone, press the button beneath the remote control’s label with a pen- cil. Then repeat this step.

	PANIC
ARM
HOME
Press
ARM		DISARM
AWAY
SECURITY
ON	LIGHT		OF
ON			OF

14