QUICK INSTALLING/TESTING YOUR SYSTEM
This section describes how to initialize system accessories so the console recognizes them and how to test the system to make sure it works properly. Perform all the procedures in this sec- tion, then follow the instructions in “Lo- cating and Mounting Accessories.”
You can add other separately pur- chased accessories to the system by following the appropriate initialization and testing procedures in this section.
SETTING UP THE
CONSOLE
1.Choose a location for the console that is:
•Close to a modular phone jack.
•Central to doors/windows you want to protect so all sensor transmitters are within 100 feet.
•Positioned where you can eas- ily check the zone indicators for problems, but not where an intruder could easily see it.
2.For backup power in case of an AC power failure, connect and place a
3.Plug the console into any stan- dard AC outlet that is not con- trolled by an on/off switch, then fully extend the antenna.
4.Plug the telephone cord into the console and plug the other end into a modular phone jack.
12
