Radio Shack 49-2570 owner manual Installing The Keychain Remote Control

49-2570.fm Page 13 Wednesday, August 18, 1999 3:59 PM

Notes:

•If you do not have an unused jack, use the supplied duplex adapter. For a baseboard jack, plug the adapter into the jack; for a wall jack, plug the adapter into the console.

To

Telephone

•If you do not have a modular phone jack, you can either update the wiring yourself or have the phone company do it for you. Radio Shack stores sell the jacks and adapters you need. The phone company charges to install the jacks. The USOC number of the jack to be installed is RJ11C for a baseboard jack or RJ11W for a wall jack.

INSTALLING THE KEYCHAIN REMOTE CONTROL

1.Remove the keychain remote con- trol’s back cover. Install two AAA alkaline batteries (Cat. No. No. 23-555) in the battery compart- ment, according to the polarity symbols (+ and –) marked inside. Then replace the cover.

2.Set the console’s INSTALL/RUN 1/ RUN 2 switch to INSTALL.

3.Stand near the console and press ARM on the remote control. The console chimes and logs in the remote control.

BATTERY

ARM

PANIC

DISARM

ON

LIGHTS

OFF

4.Leave the console’s switch set to INSTALL to install other accesso- ries.

13