Using the paper guide

Installing the paper guide

*The paper guide (PG-200) is sold separately.

1Position the paper guide so that the paper check window is visible.

2Align the tabs on the left and right sides with the slots, and then press down until they snap into place.

#The paper guide is not intended to be frequently installed and removed. Frequently installing and removing the paper guide may damage the printer or cause the cover or paper guide to warp.

Removing the paper guide

1Open the paper cassette cover.

2One side at a time, use a standard (slotted) screwdriver to unhook the paper guide tabs near the areas shown by 1 below.

16

Page 33
Image 33
Brother MW-260 appendix Using the paper guide, Installing the paper guide