Appendix

Symptom: Although the print command was issued, the printer does not print.

With a IrDA connection:

Remedy: Make sure that there is no obsta- cle between this printer and the Pocket PC or infrared communication port of the portable telephone, and check that they are within 20 cm of each other. (Refer to page 13.)

Remedy: Disable if the USB cable is con- nected. (Refer to page 13.)

Remedy: If the AC adapter is connected, noise from the household electrical outlet may be stopping the communi- cation. Unplug the AC adapter.

Remedy: When the interface switch is set to “Bluetooth”, IrDA cannot be used. Set the switch to “IrDA” and check that the status indicator lights up in green.

With a Bluetooth connection:

Remedy: Make sure that Bluetooth com- munication will be valid using the set- tings of the computer or Pocket PC.

(Refer to the Software Guide.) Remedy: Make sure that another com-

puter or Pocket PC is not transmitting data to the printer using the USB or Bluetooth.

(Refer to page 14.)

Remedy: When the interface switch is set to “IrDA”, Bluetooth cannot be used. Set the switch to “Bluetooth” and check that the status indicator lights up in blue.

With a USB connection:

Remedy: Check that this printer is securely connected to the computer with the USB cable.

(Refer to page 14.)

Remedy: Make sure that another com- puter or Pocket PC is not transmitting data to the printer using Bluetooth. (Refer to page 14.)

21

Page 38
Image 38
Brother MW-260 appendix With a Bluetooth connection