Operating Procedures
7
Turning on/off the printer1
Press and hold the power
button for a short while, until
the green or blue status indi-
cator light illuminates.
→When the printer is turned on, the sta-
tus indicator lights up in blue (when
the interface switch is set to “Blue-
tooth”) or it lights up in green (when
the interface switch is set to “IrDA”).
(→Refer to page 24.
)
#In order to prevent this printer from accidentally
being turned on, it does not come on if the power
button is lightly pressed. Therefore, if the printer
does not come on, hold the power button pressed
for a short while.
#In order to conserve power from the rechargeable
lithium-ion battery, the following printer functions
are performed during operation.
#When the interface switch is set to “Bluetooth”:
If there is no operation or data transmission for a
set length of time, the printer automatically enters
the sleep mode. (→ page 24) The length of time
until the printer automatically enters the sleep
mode can be specified from the utility.
(→ Refer to the Software Guide.)
#When the interface switch is set to “IrDA”:
If there is no operation or data transmission for a
set length of time, the printer automatically turns
off. The length of time until the printer automati-
cally turns off can be specified from the utility.
(→ Refer to the Software Guide.)