Various CD playback features
31
Various CD playback features
Listening to the desired sequence (program playback)
Use the following procedure to program desired tracks in a desired order. (up to 32 tracks)
Select the CD input.
1Let the "PGM" indicator light.
Lights
Press in stop mode
PGM
P G M C D
2Select track numbers in the order you want to play them.
1Select the track.
1 2 3
4 5 6
Selection of tracks
Program position of the track to be selected next.
7 8 9
10 0
(Go to step 2 within 20 seconds.)
2Confirm the selection.
SET
(To select more than one track, repeat steps 1and
2for each track.)
P G M C D
Press the numeric keys as shown below....
To select track No. 23 | : +10 X 2, 3 |
To select track No. 40 | : +10 X 4, 0 |
÷Up to 32 tracks can be programmed. When "PGM FULL" is displayed, no more tracks can be programmed.
÷If you made a mistake, press the CLEAR key and enter the track No. again.
÷When a track No. is entered, the track will be added to the end of the existing program.
÷When the total time of CD program is 256 minutes or more, the time display shows "-
section Application
3Start playback.
CD 6
÷Tracks will be played in the order they were pro- grammed (following the program numbers).
÷When the 4/ ¢ key is pressed during play, the pro- gram will jump to the preceding or the following track respectively.
÷When the 4key is pressed once during playback, the play position returns to the beginning of the current track being played.