40 Clock adjustment
Timer operation
As the clock is not used to show the time of the day but is also used in timer operations, be sure to set the clock in advance.
1Activate the clock adjustment mode.
Press and hold for more than 2 sec. when the power is ON.
menu
2Enter the figure of hour.
1Enter the figure of hour.
To decrease | To increase |
hour | hour |
volume / multi control
2Set it.
set / demo
3Enter the figure of minute.
1Enter the figure of minute.
section | minute | minute |
Application | To decrease | To increase |
volume / multi control |
| |
| 2Set it. | set / demo |
|
|
A D J U S T
÷The time display starts to blink.
Example: Adjustment to 8:07
A D J U S T
÷In other areas than the U.K. and Europe the clock shows the time of the day in the
÷Press the set/demo key. The hour is entered and the minute display starts to blink.
Example: Adjustment to 8:07
A D J U S T
÷If you make a mistake, restart from the beginning.
÷When the time of day has been set by pressing the set/demo key, the display shows "COMPLETE !".
÷After a power failure or the power cord has been un- plugged then plugged in again, it is required to set the time again.
÷When the 7 STOP key is pressed while the power is in the standby mode, the time of the day will be displayed for 5 seconds.