Kenwood HM-333 Operation, Loading batteries

7Numeric keys&™

Used to select a CD track number or recall a preset station of the tuner.

8PTY/ TIME DISPLAY key (For Europe and U.K.)

*¡§

Used at the time of program type detection.

Press to switch the displayed time information on CD.

TIME DISPLAY key (For other countries)

*¡

Press to switch the displayed time information on CD.

DISPLAY key

*

Press to switch the display mode of the display panel.

13

ControlsSystemandconnecindicatorsion

9SOUND key

%

Press to switch the sound effect to EX.BASS or LOUD.

TONE key	%
Press to adjust the tone.
0MUTE key	%
Press to mute the audio temporarily.

section Preparation

Loading batteries

1 Remove the cover.

2 Insert batteries.

3Close the cover.

÷Insert two R6 ("AA"-size) batteries following the polarity indications.

Operation

After plugging the power cord of this unit, press the POWER ( ) key of the remote control unit to turn the system ON. When the system is turned ON, press the key of the function to be operated.

÷When pressing more than one remote control keys successively, press the keys securely by leaving an in- terval of 1 second or more between keys.

Operating range (approx.)

Remote sensor

FM/AM

6

6 m

30˚30˚

÷The provided batteries are intended for use in operation checking, and their service life may be short.

Notes ÷ When the remote controllable distance becomes short, replace both of the batteries with new ones.

÷If direct sunlight or the light of a high- frequency fluorescent lamp (inverter type, etc.) is incident to the remote sensor, malfunction may occur. In such a case, change the installation position to avoid malfunction.

Contents

TEXT 2 Before applying power Special features Unpacking Accessories For the U.S.A FCC WARNING Contents Preparation section Basic section Application section Knowledge sections 6 System connection Connection of the System Accessories Malfunction of microcomputer FM indoor antenna Connection of Other Accessories (Commercially Available Parts) Display Main unit *About the volume/multi control knob Standby mode Operation of remote control unit Loading batteries Operation 14 Basic use method 1.Set the Power key to ON 2.Selecting the desired output Listening through headphones Muting the sound temporarily Bass and treble compensation Tone adjustment 16 Playback of CD 1. Load a disc 2.Start playback Start playback/ To pause playback Playback from desired track Skipping tracks Eject the CD Time display on CD player Title display with CD-TEXTcompatible discs Page 20 Playback of tape 1. Load a cassette tape Page 22 Receiving broadcast station 1.Select the tuner input 2.Preset a radio station in memory 3.Tuning (Preset Call) Collective presetting of stations Channel space setting Tuning a non-presetradio station (Auto tuning, Manual tuning) One-by-onepresetting (Manual preset) R.D.S. (Radio Data Searching for a desired program type (PTY search) 1Select the PTY search mode 2Select the desired program type 3Start the search 28 Recording on TAPE 1.Load a tape in deck 2. Select the tape transport direction 3.Set the recording condition 4.Select the source to be recorded 5.Start recording Points in CD recording Listening to the desired sequence (program playback) 1Let the "PGM" indicator light 2Select track numbers in the order you want to play them 3Start playback To add a track to an existing program To clear a programmed track Repeated playback Playing tracks in a random order (random playback) Convenient recording methods One-touchedit recording (CD =TAPE) 1Make preparation for recording 2Check the current play mode of the CD player 3Start recording Program recording (CD =TAPE) 2Program the desired sequence of CD tracks 38Listening to an AUX input source 1Select AUX (external input) 2Play the connected equipment 3Adjust the volume Page 40 Clock adjustment 2Enter the figure of hour 3Enter the figure of minute Timer operation Sleep timer (SLEEP) Setting the O.T.T. timer 1Select the O.T.T. timer 2Set the time at which you want to start playback or reception (On time) 3Reserve the timer operation 4Put the unit in standby mode Setting an everyday timer program (PROG. TIMER) 1Make preparations for the play (recording) 2Select the timer number 3Set the ON time then the OFF time 4Make the desired reservation 5Reserve the timer operation Important Items Maintenance Reference Disc handling precautions Never play a cracked or warped disc Disc accessories Discs which can be played with this unit Notes on cassette tape In case of difficulty CD player section Cassette deck section Remote control unit Displayed messages and actions to be taken against them Note to CATV system installer 52Specifications