Manuals / Brands / Home Audio / Stereo System / Kenwood / Home Audio / Stereo System

Kenwood HM-333 In case of difficulty, Tuner section, Operation to reset, Amplifier section/Speakers

1 52

Download 52 pages, 1.84 Mb

In case of difficulty	49

What seems to be a malfunction is not always so. Before calling for service, check the following table according to the symptom of your trouble.

Operation to reset

The microcomputer may fall into malfunction (impossibil- ity to operate, erroneous display, etc.) when the power cord is unplugged while unit is ON or due to an external factor. In this case, execute the following procedure to reset the microcomputer and return it to normal condi- tion.

÷Please note that resetting the microcomputer clears the contents stored in and it returns to condition when it left the factory.

Unplug the power cord from the power outlet then,

while holding the Power key depressed, plug the power cord again.

or

Power

Amplifier section/Speakers

Symptom	Remedy
Sound is not produced.	÷ Connect properly referring to "System connections".	6

÷Adjust to an required volume.

÷ Switch MUTE OFF.

%

÷Unplug the headphone plug.

The "standby/timer" indicator blinks in red and	÷ A speaker cord is short-circuited. Turn power off and re-connect
no sound is put out.	the speaker cord.

The "standby/timer" indicator blinks in amber.	÷ Adjust the present time again.		‚

No sound from the headphones.	÷ Insert correctly.		%
	÷ Adjust to an required volume.		$

Sound is not produced from the left or right	÷ Connect properly referring to "System connections".		6
speakers.

Theclockdisplayblinkswithoutchangingthefig-	÷ Adjust the present time again.		‚
ures.

Timer operation is not possible.	÷ Adjust the present time referring to "Clock adjustment".		‚
	÷ Set the timer ON time and OFF time.		t
	÷ Press the TIMER key to set up the execution.	ey

Tuner section

Symptom	Remedy
Radio stations cannot be received.	÷ Connect antennas.		7
	÷ Select a band.		™
	÷ Tune to the frequency of the desired station.		™

Noise interferes.	÷ Install the outdoor antenna in an apart position from the road.

÷Switch the suspected electric appliance OFF.

÷Install the TV or the system at an increased distance between them.

A station has been preset but it cannot be re-	÷	Preset stations with tunable frequencies.	£
ceived by pressing the P.CALL key.	÷	Preset stations again.	£

sections Knowledge

Contents

TEXT 2 Before applying power Special features Unpacking Accessories For the U.S.A FCC WARNING Contents Preparation section Basic section Application section Knowledge sections 6 System connection Connection of the System Accessories Malfunction of microcomputer FM indoor antenna Connection of Other Accessories (Commercially Available Parts) Display Main unit *About the volume/multi control knob Standby mode Operation of remote control unit Loading batteries Operation 14 Basic use method 1.Set the Power key to ON 2.Selecting the desired output Listening through headphones Muting the sound temporarily Bass and treble compensation Tone adjustment 16 Playback of CD 1. Load a disc 2.Start playback Start playback/ To pause playback Playback from desired track Skipping tracks Eject the CD Time display on CD player Title display with CD-TEXTcompatible discs Page 20 Playback of tape 1. Load a cassette tape Page 22 Receiving broadcast station 1.Select the tuner input 2.Preset a radio station in memory 3.Tuning (Preset Call) Collective presetting of stations Channel space setting Tuning a non-presetradio station (Auto tuning, Manual tuning) One-by-onepresetting (Manual preset) R.D.S. (Radio Data Searching for a desired program type (PTY search) 1Select the PTY search mode 2Select the desired program type 3Start the search 28 Recording on TAPE 1.Load a tape in deck 2. Select the tape transport direction 3.Set the recording condition 4.Select the source to be recorded 5.Start recording Points in CD recording Listening to the desired sequence (program playback) 1Let the "PGM" indicator light 2Select track numbers in the order you want to play them 3Start playback To add a track to an existing program To clear a programmed track Repeated playback Playing tracks in a random order (random playback) Convenient recording methods One-touchedit recording (CD =TAPE) 1Make preparation for recording 2Check the current play mode of the CD player 3Start recording Program recording (CD =TAPE) 2Program the desired sequence of CD tracks 38Listening to an AUX input source 1Select AUX (external input) 2Play the connected equipment 3Adjust the volume Page 40 Clock adjustment 2Enter the figure of hour 3Enter the figure of minute Timer operation Sleep timer (SLEEP) Setting the O.T.T. timer 1Select the O.T.T. timer 2Set the time at which you want to start playback or reception (On time) 3Reserve the timer operation 4Put the unit in standby mode Setting an everyday timer program (PROG. TIMER) 1Make preparations for the play (recording) 2Select the timer number 3Set the ON time then the OFF time 4Make the desired reservation 5Reserve the timer operation Important Items Maintenance Reference Disc handling precautions Never play a cracked or warped disc Disc accessories Discs which can be played with this unit Notes on cassette tape In case of difficulty CD player section Cassette deck section Remote control unit Displayed messages and actions to be taken against them Note to CATV system installer 52Specifications