●To cancel timing during the count down, press the timer button. It will continue heating unless it is switched off.
safety features
●The induction hob will turn off if it is not operated in two minutes.
●In use, unless a suitable pan of at least 12cm diameter is used a beep will sound for approximately 1 minute. If an appropriate pan is not placed onto the surface in this time the induction hob automatically turns off.
●If the appliance overheats or pans boil dry, the induction hob automatically enters a protective condition where its heating is then regulated. If the overheating continues, the appliance may display a protection code (see troubleshooting guide).
●During use if there are problems with the mains supply, the induction hob automatically enters a protective state and displays a protection code. Unplug the appliance and wait for supply to return to normal (see troubleshooting guide).
●If the induction hob is in operation and no button is pressed it has an automatic
power | time | |
level | ||
| ||
1, 2 | 4 hours | |
3, 4 | 3 hours | |
5, 6 | 2 hours |
●Once the pan is moved away the hob plate will stop heating.
care & cleaning
●Switch off, unplug and allow the appliance to cool down completely before cleaning.
●Never immerse the induction hob in water.
Hob plate, body and control panel:
●Wipe with a soft damp cloth or non
– abrasive cleaner and dry thoroughly. Ensure all traces of cleaner are removed. Do not use abrasive or scouring detergents/powders, scouring pads or steel wool as they will damage or crack the hob plate or damage the control panel.
●Dust, fat and liquids from food that has boiled over must be removed as soon as possible. If they are allowed to harden they become increasingly difficult to remove. Do not use a knife or other sharp utensil as these may damage the hob plate or control panel.
Air entry and air vent:
●After long periods of use dirt and dust may accumulate in the air entry or air vent. Clean with a soft flexible brush. Never wash using water.
5
