Kenwood IH100 manual suitable cookware, before plugging in, Important - UK only

●Do not use this appliance as a hot plate.

●Do not use the induction hob to heat anything other than food in suitable pans.

●Never use with pans that are empty.

●In the unlikely event of the contents of the pan catching fire: turn off the appliance, smother the pan with a damp cloth and leave to cool completely prior to handling the pan.

●As with all hobs, in the event that cookware is accidentally overheated and allowed to boil dry, it is important that before moving from the induction hob the heat source be turned off and the pan allowed to cool.

●Overheating should be avoided at all times. Persistent overheating can cause permanent damage to your cookware.

●Do not place credit cards, magnetic media or sensitive electronic equipment near to the appliance when in use.

●Do not use the appliance outdoors.

●During operation, the induction hob should be placed horizontally, on a flat heat resistant surface, at least 10cm away from all sides of the wall.

●Do not let infirm people use the appliance without supervision.

●Do not let children use or play with the appliance.

●Only use the appliance for its intended domestic use. Kenwood will not accept any liability if the appliance is subject to improper use, or failure to comply with these instructions.

suitable cookware

●Only use flat bottomed pans that are suitable for induction hob use. If in doubt, check with the manufacturer of your pans. If they are unsuitable the induction hob will not detect the pan.

●The induction hob is suitable for pans with a base diameter of 12 – 22cm.

●Metal cooking utensils are not recommended since they can be heated through the induction hob if left in the pan during cooking.

before plugging in

●Make sure your electricity supply is the same as the one shown on the underside of your induction hob.

Important – UK only

●The wires in the cord are coloured as follows:

Blue = Neutral, Brown = Live.

●The appliance must be protected by a 13A approved (BS1362) fuse.

Note:

●For non-rewireable plugs the fuse cover MUST be refitted when replacing the fuse. If the fuse cover is lost then the plug must not be used until a replacement can be obtained. The correct fuse cover is identified by colour and a replacement may be obtained from your Kenwood Authorised Repairer (see Service).

●If a non-rewireable plug is cut off it must be DESTROYED IMMEDIATELY. An electric shock hazard may arise if an unwanted non-rewireable plug is inadvertently inserted into a 13A socket outlet.

●This machine complies with European Economic Community Directive 89/336/EEC.

3