troubleshooting guide
problems | suggestions |
|
|
After the appliance is plugged in | • Check that the plug is inserted correctly |
and the power button is pressed, | and that the power is switched on. |
no indicators are lit | • Where fitted check the plug fuse. |
The power button indicator lights | • Check that pan is present |
up, but heating does not start | • Check suitability of the pan |
when power control is adjusted | • Check that pan is centrally located |
|
|
Heating stops suddenly | • Check power supply to the appliance |
during operation | • Check the air entry or the air vent is |
| not blocked |
| • Check the timing period has not ended |
| • Check the appliance has not overheated |
| or entered error mode – unplug, allow to |
| cool and try again later |
|
|
In timer mode, the timer is set and | • Increase the power with the power |
the on/off button is flashing but | control |
heating does not begin. |
|
|
|
Failure codes occur: | • Appliance may have overheated/boiled |
E:03 E:06 | dry. Unplug the appliance, allow to cool |
| and try again later |
E:07 E:08 | • Fluctuation in mains supply. Unplug the |
| appliance, allow to cool and try again |
| later |
|
|
E:01 E:02 E:04 E:05 E:0b E:0C | • Send it to a service facility for repair |
7