to take your juicer apart
1Remove the pulp collector by pressing the pulp collector catch
and sliding the collector out.
2Unlatch the lid and lift off.
3Remove the filter and filter holder together. Then separate for cleaning.
care and cleaning
●Before cleaning, unplug your juicer.
●If the filter is too tight to remove, wait a few minutes until it loosens up.
●Some foods, eg carrot, will discolour the plastic. Rubbing with a cloth dipped in vegetable oil helps remove discolouring.
motor unit
●Wipe with a damp cloth, then dry.
●Do not immerse in water.
●Store excess cord in the storage
area at the back of the power unit .
filter
●Clean using the brush supplied. Note: Use the flat end of the brush to remove pulp from the lid.
●Check the filter regularly for signs of damage. Do not use if the filter is damaged. Refer to “service and customer care”
other parts
●Wash in hot soapy water, then dry.
●Alternatively they are dishwasher safe and can be washed on the top rack of your dishwasher. Avoid placing items on the bottom rack directly over the heating element. A short low temperature (Maximum 50°C) programme is recommended.
service and customer care
●If the cord is damaged it must, for safety reasons, be replaced by KENWOOD or an authorised KENWOOD repairer.
●If you experience any problems with the operation of your juicer, before calling for assistance refer to the troubleshooting guide.
If you need help with:
●using your juicer or
●servicing or repairs (in or out of guarantee)
UK only
call Kenwood customer care on
023 9239 2333. Have your model number ready (ie JE850) and date code (5 digit code ie 10D13) ready. They are on the underside of your power unit.
●spares and attachments
call 0870 2413653. other countries
●Contact the shop where you bought your juicer.
●Designed and engineered by Kenwood in the UK.
●Made in China.
5