Connections

Connecting Associated Products (Commercially Available)

Before connecting associated system products, be sure to read their instruction manuals.

Connect every connection cord firmly. Incomplete insertion may cause loss of audio output or generation of noise.

Caution for connection

Set the main unit in the standby mode before connecting any associated product to it and do not set the power key to ON until all connections are completed.

Before unplugging a connected cord or cable, be sure to set the power key to OFF and unplug the power cord from the power outlet in advance.

USB mode

Storage

Player

* C e r t a i n m o d e l s display the USB connection mode selection menu. In this case, select the “Storage” mode.

D.AUDIO IN connector

Connect a Kenwood digital a u d i o p l aye r ( s e p a rate l y available HD20GA7 or M1GC7). C o n n e c t i n g i t u s i n g t h e dedicated cable makes it possible to control it from the main unit or remote control unit (Refer to page 10 of the “Operating Procedures”.)

USB connector

Connect a Kenwood digital memory audio player (separately available M1GC7) or other USB mass storage class-compatible digital audio player.

*With certain models, it takes a certain period before the connection is recognized.

Caution for USB connection

Do not connect a component other than

aUSB mass storage class-compatible digital audio player to the USB connector. Kenwood will not assume any liabilities for the malfunction, damage or loss of data that may result from connection of other kind of component.

PHONES jack

Connect headphones (separately available) equipped with a stereo mini-plug.

10 English