Controls, Connectors and Indicators
Display
The display design mentioned in the following text may differ from the actual design
| 20 | 1 | 2 | 3 |
19 |
|
|
| 4 |
|
|
| 5 | |
18 |
|
|
| |
|
|
| 6 | |
17 |
|
|
| |
16 |
|
| 7 | |
15 |
|
|
| |
|
|
|
|
14 | 13 | 12 | 11 | 10 |
The indicators light to indicate the MULTI CONTROL keys that can currently be pressed for editing or selection operation.
3Timer indicator (Refer to page 46 of the“Operating Procedures”.)
The indicator lights up when the timer is activated.
4D.AUDIO indicatorThe indicator lights when a Kenwood digital audio player is connected through the dedicated cable.
5Sound setup indicator (Refer to page 18 of the “Operating Procedures”.)The indicator lights when the sound setup is enabled.
98
13Recording progress indicatorThe indicator segments show the progress of recording.
14Record
The indicators light to indicate the modes of recording in the USB audio player and memory card.
15MUTE indicator (See page 24.)The indicator lights during audio muting.
16Play/record/pause indicators17Record setup indicators (Refer to page 57 of the “Operating Procedures”.)The indicators light according to the recording speed and input settings.
An indicator lights up according to the type (compression format) of the music file being played.
7Source operation indicatorsThe indicators for the connected (inserted) audio input source or recording condition light or blink.
8REC REMAIN indicator (Refer to page 54 of the “Operating Procedures”.)The indicator lights when the remaining recording time is being displayed.
19 : Lights in SETUP or TOOL operation.
: Lights when a folder in a USB audio player or memory card is selected.
: Lights when a music file in a USB audio player or memory card is selected
20Selection cursorsEither cursor lights to indicate the character information being selected.
9Tuner and
10O.T.E.
The indicator lights during O.T.E. recording.
11One of the indicators light according to the selected mode. : Repeat play mode
: Random play mode
: Folder mode
: Program mode
12A.P.S. (Auto Power Save) indicator (Refer to page 68 of the “Operating Procedures”.)
12 English
Demonstration function
This system incorporates a demonstration function (display only). In the demonstration mode, the lighting operation indicators vary in sequence but this variation is accompanied with no change in played audio.
To cancel (switching demonstration off)
SETUP/DEMO Press during demonstration.
To start (switching demonstration on)
SETUP/DEMO Press and hold for more than 2 seconds while the system power is ON.
*The demonstration is switched on automatically when a power failure occurs or the power cord is unplugged or plugged in again while the system power is ON.