Miele DG4082, DG 4088 installation instructions Frequently asked questions, Possible fault

Frequently asked questions

The oven does not change from the heating to cooking phase after relocation.

Possible fault	Solution
The oven must be reset to a new	See "Setting the altitude".
location and/or boiling temperature
of the water.

A great deal of steam comes out of the appliance while in use, or steam comes out of unusual locations.

Possible fault	Solution
The door is not properly closed.	Close the door.
The door gasket does not fit	Press it on, so it evenly fits.
properly.
The door gasket is damaged.	The gasket must be replaced.
	If the problem persists, call Technical
	Service.

A whistle sounds when the cooking is resumed.

Possible fault	Solution
Once the door is closed pressure is	This is not a fault.
vented with a whistling sound.

The display shows a F with a number.

Possible fault	Solution
F 20 The oven does not heat.	Check if the steam generator is inserted all
	the way by removing it and inserting it
	again.
	Turn the steam oven off and on again.
	If the fault occurs again, lightly lubricate the
	connection valve of the steam generator
	with silicone grease, as described in
	"Cleaning and care - Connection valve".
	If the problem persists, turn the appliance off
	and call Technical Service.
Other fault messages	Call the Miele Technical Service
	Department.

42