Frequently asked questions
Repairs should only be carried out by an authorized technician in accordance with local and national safety regulations. Unauthorized repairs could cause injury or appliance damage.
The oven cannot be turned on.
Possible fault | Solution |
|
|
There is no power to the steam | Reset the circuit breaker if it has tripped. |
oven. | If this is not the case, disconnect the |
| appliance from the power supply for 1 |
| minute. |
| Reconnect the power and turn the |
| appliance on. If it still does not heat, contact |
| Miele Technical Service. |
|
|
The fan can still be heard after the appliance has been turned off. | |
Possible fault | Solution |
|
|
The appliance has a fan which | The fan will continue to run for a while after |
removes steam from the oven. | the oven has been turned off. |
|
|
The steam generator is difficult to insert or remove. | |
Possible fault | Solution |
|
|
The connection valve at the steam | Lubricate the connection valve (not the |
connector needs to be lubricated. | electrical connection!) with a small amount |
| of the supplied silicone grease. See |
| "Cleaning and care - Connection valve". |
|
|
The heating phase takes an unusually long time. | |
Possible fault | Solution |
|
|
Check the bottom of the steam | Set the level to the water hardness of your |
generator. If there are calcium | area. See "Setting the water hardness". |
deposits, check the water | Descale the steam oven as described in |
hardness level setting. | "Descaling". |
| If the water hardness is set correctly or if the |
| problem persists, call Technical Service. |
|
|
41
