Connections
Connecting the main unit and accessories
Connec t ever y connec tion cord firmly. Incomplete insertion may cause loss of audio output or generation of noise.
Caution for connection
Do not plug the power cord into the power outlet until all other connections are completed. Before unplugging a connected cord or cable, be sure to set the power key to OFF and unplug the power cord from the power outlet in advance.
Malfunction of microcomputer
If the system does not work properly or the display shows wrong information even when correct connections are made, refer to page 71 of the “Operating Procedures” to take proper measure.
FM indoor antenna
The provided FM antenna is a simplified one for indoor use, intended for temporary use. To receive FM stations stably, it is recommended to use an outdoor antenna (commercially available). Remove the simplified antenna after connecting the outdoor antenna.
1Connect the antenna to the antenna terminal.
2Find the antenna location that offers best reception.
3Fix the antenna in the found location.
Connecting a speaker cord to the speaker
LS-K501 R
(Right speaker)
Treatment of the speaker cord extremities
Twist and remove the vinyl coating on the extremity of each speaker cord. Also, apply the same treatment to the antenna cord extremities.
Connecting a speaker cord to the main unit
White line on transparent coating
Caution for speaker cord connection
Be careful not to
If the speaker cord is connected by inverting the + and
–polarity, the reproduced audio will be unnatural with unclear positioning of musical instruments.
8English