These are the operating procedures.
Indicates a step using the remote control unit. Press the remote control unit keys to perform this operation.
Indicates a step using the main unit. Press the main unit keys to perform this operation.
*Steps with which both 
and 
are shown can be performed using either the remote control unit or main unit.
Press the MEMORY REC key again to enter record mode.
*A message [Don't remove MEMORY CARD] is scrolled.
5Start playback of the Kenwood digital audio player.
*If the dedicated cable is not used for the connection, start playback on the connected Kenwood digital audio player.
| If the memory card contains a folder named AL_Z90 | |
Hint | or higher, a message [CHECK REFRESH] is displayed | |
and recording cannot be started. In this case, it | ||
| ||
| is required to rearrange the folders by means of | |
| refreshing. (See page 52.) |
Dividing music during recording
During recording from the TUNER, AUX or D.AUDIO source to a memory card, the recorded music file can be divided into multiple music files by manually entering a track mark (music division mark). Each press of the key or knob creates a new music file from that point.
Press at the point you want to divide the music.
* The track marks can also be entered 
automatically. (See
page 59.)
If the audio recorded is distorted or too low
Adjust the recording level. (See page 58.)
Display during or after each
operation
The text represents the characters displayed as the character information on the display by enclosing them in [ ].
Record |
|
| ||
Example: Select [INTRO SCAN]. | ||||
Recording | * The display illustrations in this manual | |||
have been drawn exclusively for use | ||||
| ||||
Music | in explanation. They may differ from | |||
the actual views of the display. | ||||
Player Audio Digital Kenwood from | ||||
|
| |||
Supplementary tips on |
| |||
| operations |
| ||
|
|
|
| |
When recording completes:
The memory card stops and a message [DATA WRITING] is displayed.
*Do not switch the system OFF or apply shock or vibration to it while [DATA WRITING] is displayed.
*If the power to the system is shut off before [DATA WRITING] disappears, the recorded data will be lost.
When the memory card becomes full before completion of recording:
A message [STOP REC No Capacity] is displayed. Erase the unnecessary music files before retrying recording from the beginning. (See page 36.)
Items and operations related
to the above operation
33
23