Your new table saw has been designed to give you many years of high quality performance. To insure this goal, proper care and treatment is important. Careful treatment begins with removing all parts from the carton and checking them against the list of loose parts. The long box contains the rails. The large box holds all other parts, which are detailed in the Loose Parts List.
•Separate the saw and all parts from the packing materials and check each against the packing list, especially the small parts that can be hidden in the packing material.
Note: Do not discard the packing materials until you have carefully inspected the saw, identified all parts, and satisfactorily operated your new saw.
,_k WARNING: Never use gasoline, naptha, or other highly volatile solvents. Do not ever let
brake fluids, gasoline,
products, or penetrating oils contact plastic parts. Such chemicals can weaken or destroy plastic.
•Remove the wax paper covering on the table. Use any ordinary household type grease and spot remover. Immediately apply a coat of paste wax to the table and table extensions.
,_ WARNING: To prevent accidental starting that | |
u | could cause possible serious personal injury, |
| |
| assemble all parts to your saw before connecting |
| it to power supply. Saw should never be |
| connected to power supply when you are |
| assembling parts, making adjustments, installing |
| or removing blades, or when not in use. |
AWARNING: tf any parts are missing, do not operate this tool until the missing parts are replaced. Failure to do so could result in possible serious personal injury.
The following recommended accessories are currently available at Sears Retail Stores.
Fence Guide | System | 7 in. Stack | Steel | Dado |
Guide Master |
| 7 in. x 9/16 in. Stack Dado | ||
|
| |||
Box Joint & Miter Guide | 7 in. Molding Head Set | |||
|
| |||
Universal Jig |
| 2 Bit Molding Head Set | ||
|
| |||
Taper Jig |
| Saw Baskets |
| |
|
|
| ||
10 in. Sanding Disc | Jointer Clamps |
| ||
|
|
| ||
8 in. Sanding | Disc | Specialty Throat | Plate | |
|
| |||
Elite Dado |
| Miter Gage Hold Down Clamp | ||
|
| |||
Excalibur Dado | ||||
|
| |||
7 in. Adj. Dado 36 tip | Dust Collection System | |||
|
| |||
7 in. Adj. Dado 24 tip | Accessory | Table |
| |
|
|
| ||
,_ WARNING: | The use of attachments | or accessories not listed | might | be hazardous. |
9 | I:RI:IFT$1_IRN _ TABLE SAW 315.228390 |