8CRAPWOOD

BLADEGUARD18NOTSHOWNFORCLARITY

 

BLADE GUARD

BLADE

__

FRAMING

SQUARE

AT FRONT

NUT I MARKEDTOOTH

BLADE

WASHER

TO TIGHTEN

 

BLADE NUT

Fig. 37

HEELING (PARALLELING) THE SAWBLADE TO THE MITER GAGE GROOVE

See Figures 38- 40.

DO NOT loosen any screws for this adjustment until you have checked with a square and made test cuts to be sure adjustments are necessary.

Once the screws are loosened, these items must be reset.

MITERGAGEGROOVE

Fig. 38

C33

MARKEDTOOTH

AT BACK

SQUARE

G FRAMING

,_ WARNING: Make sure the switch is off, the switch key is removed, and your saw is un-

plugged. Failure to do so could result in acciden- tal starting, resulting in serious personal injury.

_, WARNING: The sawblade must be parallel to the miter gage groove so the wood does not

bind, resulting in kickback. You could be hit or cut.

Lift the blade guard. Raise the blade all the way by turning the height handwheel.

Mark beside one of the sawblade teeth at the front of the blade. Place a framing square beside the blade on the mark. Be sure the framing square is between the teeth and flat against the blade. Measure the distance to the right miter gage groove.

Turn sawblade so the marked tooth is at the back.

Move the square to the rear and again measure the distance to the right miter gage groove. If the distances are the same, the blade and the miter gage groove are parallel. No adjustments are needed.

MITERGAGEGROOVE

Fig. 39

If the distances measured are different, adjust the table bracket underneath the saw.

_lb WARNING: When reaching under the saw table, wear gloves. Accidental contact with the

blade could cause a cut resulting in serious personal injury.

Remove the throat plate by loosening the front screw with a phillips screwdriver. Lift the throat plate and pull it out by the front end.

Lower the blade completely with the height handwheel. You can then access the table brackets

through the throat plate opening.

From the back, loosen the three rear screws holding rear table bracket using a 12 mm wrench.

If the blade was too far from the miter gage groove, move the rear bracket toward the miter gage groove. Tap with a block of wood and hammer.

31CI_RFTSMRN_TABLESAW 315.228390

Page 31
Image 31
Craftsman 315.22839 BLADEGUARD18NOTSHOWNFORCLARITY, AT Front NUT I Markedtooth Blade, See Figures 38, Mitergagegroove

315.22839 specifications

The Craftsman 315.22839 is a versatile and reliable power tool that has gained popularity among DIY enthusiasts and professionals alike. Known for its robust construction and user-friendly features, this electric tool is perfect for a variety of tasks, from sanding and drilling to cutting.

One of the main features of the Craftsman 315.22839 is its powerful motor. Equipped with a reliable engine, it delivers impressive torque and speed, making it capable of tackling demanding projects. The tool boasts adjustable speed settings which allow users to customize the tool's performance based on the task at hand. This feature not only enhances precision but also promotes efficiency as users can switch speeds for different materials and applications.

Another standout attribute of the Craftsman 315.22839 is its ergonomic design. It has a comfortable grip that minimizes hand fatigue during extended use, ensuring that users can work longer and more efficiently. Additionally, the lightweight construction of the tool allows for easy maneuverability, making it ideal for both intricate and large-scale jobs.

The Craftsman 315.22839 also integrates advanced safety features. It includes a safety lock switch that prevents accidental startups, a crucial aspect for ensuring user safety during operation. The durable housing is designed to withstand the rigors of heavy usage, ensuring longevity and reliability in various work environments.

Versatility is a hallmark of the Craftsman brand, and the 315.22839 is no exception. It is compatible with a range of attachments and accessories, allowing users to switch between different functionalities. Whether you’re drilling into wood, cutting through metal, or sanding surfaces, the adaptable nature of this tool makes it a valuable addition to any toolbox.

In terms of technology, Craftsman has incorporated innovative engineering techniques to enhance the performance and durability of the 315.22839. Features like heat-resistant materials and advanced cooling systems ensure that the tool can operate under strenuous conditions without overheating or losing efficiency.

Overall, the Craftsman 315.22839 stands out in the crowded market of power tools. Its combination of power, efficiency, and user-friendly design makes it an excellent choice for both novice and experienced users looking for reliable performance. Whether you are embarking on a home improvement project or tackling a professional job, the 315.22839 is equipped to deliver results that meet your expectations.