Kenwood KAC-8151D Controls / Indicator, 1EXPANDER switch, 2LPF Low-PassFilter FREQUENCY control

Models: KAC-8101D KAC-8151D

1 11
Download 11 pages 4.02 Kb
Page 4
Image 4
Controls / Indicator

Controls / Indicator

 

 

 

(W)

 

 

 

40

 

 

 

20

 

 

 

10

1

2 3

4

5

1EXPANDER switch

When this switch is turned ON the dynamic range is increased.

2LPF (Low-Pass Filter) FREQUENCY control

This control adjusts the frequency band output from this unit.

3INFRASONIC switch

Ultralow frequencies that cannot be reproduced even by a subwoofer speaker do not become sound but become unnecessary oscillations, which affect the sound by causing distortion, etc. Setting this switch to "15 Hz" or "25 Hz" cuts the frequencies below the respective frequency.

This improves the reproduction performance of the speakers by eliminating unnecessary oscillations which will not become sound.

5INPUT SENSITIVITY control

Set this control according to the pre-output level of the center unit connected with this unit, or to the maximum power output of the genuine-accessory car stereo.

Use the diagram on the right as a guide.

NOTE

For the pre-output level or the maximum power output, refer to the “Specifications” in the instruction manual of the center unit.

6Remote controler control (KAC- 8151D only)

When the "BASS BOOST" switch is in the "OFF (REMOTE)" position, control the Bass Boost level from the Remote Controller.

OFF position:

BASS BOOST is OFF.

+6/+9/+12 position:

Boost the bass sound by +6 dB, +9 dB and +12 dB, respectively.

4BASS BOOST switch

Sets the boost level for bass control.

12dB position:

BASS BOOST is +12 dB.

KAC-8101D: OFF position:

BASS BOOST is OFF.

KAC-8151D: OFF(REMOTE) position:

Can be set from the Remote Controller.

NOTE

If you have disconnected the Remote Controller, the BASS BOOST is turned OFF.

4English
Page 4
Image 4
Kenwood KAC-8151D Controls / Indicator, 1EXPANDER switch, 2LPF Low-PassFilter FREQUENCY control, 3INFRASONIC switch