English
— 22 —

Disc source

?CD/MD play does not start.52
CD/MD auto-changer input is not connected to the unit.
Connect the CD/MD auto-changer input to the unit.
Power button is not turned ON.53
Turn the power button ON.
The PROTOCOL selection switch of the changer switching unit "KCA-
S210A" is not set properly.54
Set the PROTOCOL selection switch to "N" position.
?The specified disc does not play, but another one plays instead.52
The specified CD is quite dirty.
Clean the CD.
The CD is upside-down.53
Load the CD with the labeled side up.
The disc is loaded in a different slot from that specified.54
Eject the disc magazine and check the number for the specified
disc.
The disc is severely scratched.55
Try another disc instead.
?The specified track will not play.58
Random play or magazine random play has been selected.
Turn off random play or magazine random play.
?Cannot play CD-R or CD-RW.60
Finalization processing is not being conducted for CD-R/CD-RW.
Conduct finalization processing with CD recorder.
?Direct Track Search and Direct Disc Search can’t be done.66-1
Another function is ON.
Turn Random Play or other functions OFF.
?Track Search can't be done.66-2
For the discs first or last song.
For each disc, Track Search can't be done in the backward
direction for the first song or in the forward direction for the last
song.
?Sound skips due to vibration.67
Something is touching the CD/MD auto-changer.
Keep it away from the CD/MD auto-changer.
The disc is dirty or damaged.68
If sound skips at the same part, the disc is faulty. Check and, if
possible, clean the disc.
Changer unit is mounted on the a slant.69
Mount the unit so that is level.
Changer unit is mounted in an unstable place.8
Mount the unit in a stable place.
The angle adjustment switches are set improperly.69
Set the angle adjustment switches to the correct positions.
?Sound quality is poor.67
The recording of the disc is poor.
Try playing another disc. If the sound is good, the fault was with
the original disc.
The disc is dirty or damaged.8
Check and, if possible, clean the disc.
?No sound is heard even though the information concerning the
CD/MD auto-changer is displayed.67
The radio volume is sets to the minimum level.
Turn the radio volume up.
The microcomputer does not function correctly.68
��Press the Reset button of the display unit. (Page 3)
The system is not connected properly.69
Connect the system properly. See <Connecting Wires to
Terminals>. (Page 18,19)
Troubleshooting Guide
KCA-R71FM_U.S_r3 04.7.8 3:58 PM Page 22