— 7—
Putting the channel in the memory.
1Select the preset band
Press the [u] button.
2Select the channel to put in the memory
Press the [4] or [¢] button.
3Put the channel in the memory
Press the [#1] — [#6] button for at least 2 seconds.
The preset number display blinks 1 time.
On each band, 1 channel can be put in the memory on each [#1]
— [#6] button.
Only the channel number is stored. Category information is not
stored.
Channel Preset Memory
Calling up the channels in the memory.
1Select the preset band
Press the [u] button.
2Call up the channel
Press the [#1] — [#6] button.
Preset Tuning
A channel is searched within the selected category.
1Enter Channel Search mode
Press the [SRCH] button.
2Select the Category
Press the [u] or [d] button.
3Select the Channel
Press the [4] or [¢] button.
Canceling Channel Search
Press the [SRCH] button.
You cannot operate this unit until all the Category information is
acquired.
Channel Search
Scanning for the channel you want to listen to.
1Start Channel Scan
Press the [SEEK] button for at least 1 second.
"SCAN" indicator is ON.
2Release it when the channel you want to listen to is received
Press the [SEEK] button for at least 1 second.
Channel Scan
Selecting the channel.
Press the [4] or [¢] button.
Select the channel
KCA-R71FM_U.S_r3 04.7.8 3:58 PM Page 7