General features

English

Audio Control Setting

Adjust various parameters of sound quality.

1Hold down the AUD button for one second or more to enter the control mode.

2Selecting mode

Press either the FM or AM button.

Each time the button is pressed, the adjustment mode will change as follows:

Pressing the FM button advances the display, and pressing the AM button reverses it.

BassFader

MiddleBalance

Treble

NOTE Source tone memory

Each source (CD, MD, FM, AM and disc changer) has its own memory in which to store the bass, middle and treble tone settings.

The settings made for a particular source are then recalled automatically whenever you use that source (e.g., FM mode uses the tone settings made for FM, AM for AM, etc.).

3Adjust each mode

Press the 4/¢ button.

Look at the table to adjust the mode being displayed.

Adjustment

Operation of Audio control button

mode

 

 

(Display)

4 button

¢ button

Bass ("BAS")

Bass decreased.

Bass increased.

 

 

 

Middle("MID")

Middle decreased.

Middle increased.

 

 

 

Treble("TRE")

Treble decreased.

Treble increased.

 

 

 

Balance("BAL")

Left channel emphasized.

Right channel emphasized.

 

 

 

Fader ("FAD")

Rear channel increased.

Front channel increased.

 

 

 

4Press the AUD button to end the control mode.

NOTE

Determining the parameters in the audio control setting will clear all the adjustments made in the System Q and they are replaced with the values made in the audio control setting.

Theft Deterrent Faceplate

The faceplate of the unit can be detached and taken with you, helping to deter theft.

Projections

Release button

Grooves

Removing Faceplate:

Press the Release button.

The faceplate is unlocked, allowing you to detach it.

NOTE

•The faceplate is a precision piece of equipment and can be damaged by shocks or jolts. For that reason, keep the faceplate in its special storage case whilst detached.

— 10 —