2WARNING

Connecting Cables to Terminals

Connecting the ISO Connector (see p.28)

Installation

Installation

The pin arrangement for the ISO connectors depends on the type of vehicle you drive. Make sure to make the proper connections to prevent damage to the unit.

The default connection for the wiring harness is described in 1 below. If the ISO connector pins are set as described in 2 or 3, make the connection as illustrated.

1(Default setting) The A-7 pin (red) of the vehicle's ISO connector is linked with the ignition, and the A-4 pin (yellow) is connected to the constant power supply.

UnitVehicle
Ignition cable (Red)A–7 Pin (Red)
Battery cable (Yellow)A–4 Pin (Yellow)

2The A-7 pin (red) of the vehicle's ISO connector is connected to the constant power supply, and the A-4 pin (yellow) is linked to the ignition.

Firewall or metal support

Screw (M4X8) (commercially available)

Self-tapping

Metal mounting

screw

strap

(commercially

(commercially

available)

available)

 

Bend the tabs of the mounting sleeve with a screwdriver or similar utensil and attach it in place.

Unit

Vehicle

Ignition cable (Red)

A–7 Pin (Red)

Battery cable (Yellow)

A–4 Pin (Yellow)

3The A-7 pin (red) of the vehicle's ISO connector is not connected to anything, whilst the A-4 pin (yellow) is connected to the constant power supply (or both the A-7 (red) and A-4 (yellow) pins are connected to the constant power supply).

Unit

Vehicle

Ignition cable (Red)

Connect to a power source that can be

 

turned on and off with the ignition key.
Battery cable (Yellow)A–4 Pin (Yellow)

NOTE

Make sure that the unit is installed securely in place. If the unit is unstable, it may malfunction (eg, the sound may skip).

— 29 —